Bandsaw Base Fabrication

I locked myself in the shop this weekend, and set about doing some housekeeping (damage control is more like it) , so I could move around the shop a little. I had some metal stock that needed to be put away, so I dragged out my Clarke (Chinee) bandsaw to cut some stuff down to size. I’ve been cursing the dismal wheels on this saw since I bought it a couple of years ago. Anyone that owns one of these saws knows what I’m talking about. Its the first thing that new buyers fix when they buy them, and is a hot topic on the Yahoo 4X6 website. I was too busy using mine to fix the problem. Well, I stumbled across a 9 1/2 foot length of 4140 stainless 2 1/2 inch diameter round stock at work in the scrap dumpster (Yeah, in the dumpster), and needed to cut it. I work at a water treatment plant, and have free reign at the metal dumpster, its like Christmas every day! Anyway, I had to support a 300 pound hunk of SS, and wrestle the saw under it to make the cut. The wheels on the saw really showed their stuff, what junk. I finally got tired of hearing myself complain about the Chinee junk and decided to grab some 2 1/2″ angle iron (from the dumpster) and make up a rolling stand for the saw. I had two sets of casters off some Craftsman tool boxes that now support my steel workbench. I probably shoulda gotten some pics of the build, but never thought about it till the paint was drying, I’ll put some shots of it on later this week. Its a world of difference. I extended the rear of the stand to stop the annoying habit it has of trying to flip over when you put the saw in the upright position, and has a much more solid feel to it. It rolls easily and is at a much better work height, about 6″ higher. I wish I had made the stand when I first got the saw.

While I was building the base I was reminded how cheezy the “wheels” on my Snap-On mig welder are. I’ve had the welder for 20+ years, and have been complaining about that for a while too. The problem is that with a big bottle of argon, theres more weight in the rear than with the “homeowner” bottle that came with the welder, and because the wheels are near the middle, the cart wants to tip to the rear when rolling. Now that I’ve made some room for myself, maybe I’ll build another cart for it. I’ve got a couple more sets of casters kicking around. Then theres the Lincon 225 arc welder. I’d kinda like to put that on casters, and have somewhere to hang the leads….

base pic 1
This is a pic of the base as described. Note the classy original base in the bottom shelf.

Please have a look at the and let BlueChipMachineShop.com provide your special maintenance and tool needs..

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply