Posts

Long Spout Oil Dispenser Bottles Back in Stock

bott-1-ex

 

A while back I had some really nice long spout laboratory wash bottles in the store that made oiling machines a breeze.  As luck would have it, my supplier went belly up and took my ready supply of reasonably priced inventory with them.  I have been getting quite a few inquiries about what happened to them, and all I could tell people was that I was looking for a replacement. Well I finally found some!  The biggest problem was finding a decent enough quality bottle that could be priced well below expensive “laboratory wash bottles”, and after sampling quite a few losers; I finally found a winner.

 

bottles 002

 

These 18 OZ bottles are durable HDPE with semi-rigid spouts.  They are chemical resistant, so they can be used for acetone, acid, paint thinners as well as lubricants or cutting oil. Bottom line; these things are as handy as it gets; I’m stoked about having a few more of these things around for my personal use in my shop.

These are available in THREE BOTTLE SETS, because that seems to be the cheapest way to ship them (USPS Priority Flat Rate Padded Envelope).

 

bottles 004

New Shop Truck: 1955 Chevrolet 3100 Short Bed Pick Up

55 driver side

 

For a while now, I’ve been thinking I need a dedicated shop truck. About four years ago I sold my 57 Chevy pick up, and regretted it almost immediately. My S-10 is not really up to the task of hauling a trailer with any weight in it, and while thats not the primary need I have, it is a consideration. I found this 1955 Chevrolet 3100 1/2 ton pick up in a “local” (10 hours away) Craigslist ad in Augusta Georgia. A few emails and phone calls later; I’m the new owner.

 

Read more

Supercharging a Johnson: (Gas Furnace, that is………..)

furnace and anvil 001

 

This is one of those projects thats been hanging around forever. I got this Johnson Gas Furnace at the CAMS Yard Sale a couple of years ago; it was lounging on Steve’s front porch- a freebee that someone never picked up. I jumped at the chance to get it; I had been wanting to explore the world of gas forging for a while (didn’t have too much luck with coal). The lid was cracked in about four pieces (the lifting ring had rotted through), and the gas regulator was missing. I looked into getting the gas rig for it, and quickly found out that a replacement would be upwards of a thousand bucks. Time to get inventive.

 

Read more

180 LB. Vulcan Anvil: “The Restoration”

anvil 031

 

One of the many things that I’ve always wanted to have around the shop is an anvil. Recently I stepped up my search for a decent “beater”, and missed out on a couple of local deals. I suppose I could have just taken a ride down to the Harbor Fright store and bought one of their Russian “anvil shaped objects”, but I have this thing for Authentic American Iron, and have learned that I’m better off spending more money for quality tools in the long run.

 

Read more

Countersink Tool Made from Surplus Junk

 

 

chuck and countersink 016

 

I was working on a drill chuck for my mill, and I ran across a Jacobs 3/8″ keyless chuck that I pulled off a power drill that leaked it’s Magic Smoke. The chuck was the only thing salvageable from the drill, and I tossed it in the chuck drawer for a future project.

 

Read more